How to Add Refrigerant to a 1991 Mercedes-Benz 300E 3.0L 6 Cyl.

Mercedes-Benz 300E Model Years - 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996

Where the low pressure A/C port is on 1991 300E and how to add add freon

Car Displayed: 2005 Mercedes-Benz E320 CDI 3.2L 6 Cyl. Turbo Diesel info

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1989 Mercedes-Benz 190E 2.6 2.6L 6 Cyl. Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

1989 Mercedes-Benz 190E 2.6 2.6L 6 Cyl. Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

1989 Mercedes-Benz 190E 2.6 2.6L 6 Cyl. Battery Jumpstart

Learning how to jump your car before you need to is an excellent idea

1989 Mercedes-Benz 190E 2.6 2.6L 6 Cyl. Brake Fluid Add Fluid

If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When the air conditioner in your 1991 Mercedes-Benz 300E starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your 300E consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.

How do you recharge AC in a 1991 Mercedes-Benz 300E? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 1991 300E AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your 300E to blow cold air.

What type of refrigerant does a 1991 Mercedes-Benz 300E use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your 300E refrigerant type. There is an AC sticker in the engine bay of your 1991 300E that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your 300E with the wrong type of freon can make the AC recharge cost much higher!

  • Advance Auto coupon for
    20% off entire order: KIOSK20