How To Open Hood: 1998 Chrysler Cirrus LXi 2.5L V6

Chrysler Cirrus Model Years - 1995, 1996, 1997, 1998, 1999, 2000

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

1998 Chrysler Cirrus LXi 2.5L V6 Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

1998 Chrysler Cirrus LXi 2.5L V6 Power Steering Fluid Check Fluid Level

Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here

1998 Chrysler Cirrus LXi 2.5L V6 Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

1998 Chrysler Cirrus LXi 2.5L V6 Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 1998 Chrysler Cirrus. Popping the hood, or bonnet, on your Cirrus is a two step process, you need to release the hood latch inside your Cirrus and then you need to release the safety latch under your hood in the front of your Cirrus. The video above shows you the location of both hood latches.

Sometimes, the hood on Chryslers gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Cirrus, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Cirrus with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Cirruss, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 1998 Chrysler Cirrus is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20