How To Open Hood: 1999 Chrysler 300M 3.5L V6

Chrysler 300M Model Years - 1999, 2000, 2001, 2002, 2003, 2004

Open the Hood - Locate hood latches and open the hood

Car Displayed: 2001 Chrysler LHS 3.5L V6 info

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2001 Chrysler LHS 3.5L V6 Windshield Washer Fluid Add Fluid

One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car

2001 Chrysler LHS 3.5L V6 Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2001 Chrysler LHS 3.5L V6 Power Steering Fluid Check Fluid Level

Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here

2001 Chrysler LHS 3.5L V6 Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 1999 Chrysler 300M. Popping the hood, or bonnet, on your 300M is a two step process, you need to release the hood latch inside your 300M and then you need to release the safety latch under your hood in the front of your 300M. The video above shows you the location of both hood latches.

Sometimes, the hood on Chryslers gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your 300M, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your 300M with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older 300Ms, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 1999 Chrysler 300M is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20