How To Open Hood: 1999 Lexus RX300 3.0L V6

Lexus RX300 Model Years - 1999, 2000, 2001, 2002, 2003

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2002 Lexus RX300 3.0L V6 Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

2003 Lexus RX300 3.0L V6 Windshield Washer Fluid Add Fluid

One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car

2003 Lexus RX300 3.0L V6 Fuse (Engine) Check

Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!

2003 Lexus RX300 3.0L V6 Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 1999 Lexus RX300. Popping the hood, or bonnet, on your RX300 is a two step process, you need to release the hood latch inside your RX300 and then you need to release the safety latch under your hood in the front of your RX300. The video above shows you the location of both hood latches.

Sometimes, the hood on Lexuss gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your RX300, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your RX300 with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older RX300s, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 1999 Lexus RX300 is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20