How To Open Hood: 2000 Mazda Miata SE 1.8L 4 Cyl.

Mazda Miata Model Years - 1999, 2000, 2001, 2002, 2003, 2004, 2005

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2004 Mazda B3000 SE 3.0L V6 Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

2005 Mazda Miata LS 1.8L 4 Cyl. Air Filter (Engine) Replace

Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?

2005 Mazda Miata LS 1.8L 4 Cyl. Fuse (Engine) Check

Odd electrical problems that come out of nowhere can often signify a blown engine fuse - check and change yours here!

2005 Mazda Miata LS 1.8L 4 Cyl. Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2000 Mazda Miata. Popping the hood, or bonnet, on your Miata is a two step process, you need to release the hood latch inside your Miata and then you need to release the safety latch under your hood in the front of your Miata. The video above shows you the location of both hood latches.

Sometimes, the hood on Mazdas gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Miata, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Miata with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Miatas, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2000 Mazda Miata is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20