Front Turn Signal Replacement on 2003 Ford Crown Victoria 4.6L V8

Ford Crown Victoria Model Years - 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

How to take out the front turn signal bulb on a 2003 Ford Crown Victoria

Learn More >

What would you like your bulbs to do? See Clearer Upgrade To LED HID Style

Consider a premium bulb like the Silverstar Ultra with a specially designed filament, proprietary gas mixture and lamp coating for the best downroad lighting. Learn more about Silverstar Ultra.
Upgrade your fog lights to LED with a direct install option that will connect easily to your car’s existing bulb housing. Sylvania has an option with aviation grade aluminum body and a turbo cooled fan. Check out Sylvania LEDs.
Consider a bulb like the zXe with a proprietary Xenon gas mixture to match the white light of HID lights for the brightest headlight and added clarity. More information on zXe bulbs.

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Transmission Fluid Fix Leaks
Dealing with minor transmission fluid leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Tires & Wheels Check Tire Pressure
Add air to your tires

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Tires & Wheels Change a Flat Tire
Change a flat tire

Learn where your spare tire and jack are located before you need it on the side of the road

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
2011 Ford Crown Victoria LX 4.6L V8 FlexFuel Lights Daytime Running Light (replace bulb)
Replace a burnt out DRL

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

2011 Ford Crown Victoria LX 4.6L V8 FlexFuel
See all videos for the 2011 Ford Crown Victoria
Share on   Share on Twitter   Share on Facebook
Parts & Tools
panel poppers
turn signal housings
electric screwdrivers
led replacement bulbs
dielectric grease
hid kits
gloves
We may earn a commission from qualifying purchases as an Amazon Associate
Full list of part and tools
Video Description

The video above shows you how to change a burnt out front turn signal bulb on your 2003 Ford Crown Victoria. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn't blink at all / stays stuck when engaged, this is your Crown Victoria's way of telling you that a turn signal bulb is burnt out. Troubleshooting for burnt out turn signal bulbs in your Crown Victoria is relatively easy - turn your hazard lights on and check the front of your Crown Victoria and then the back, whichever side is not illuminating is the side with the burnt out bulb. We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.

When changing the turn signal bulb in your Crown Victoria, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.

  • Advance Auto coupon for
    20% off entire order: KIOSK20
Ask Mechanic