Transmission Fluid Level Check 2008 Mitsubishi Lancer GTS 2.0L 4 Cyl.

Mitsubishi Lancer Model Years - 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

How to check the ATF fluid / Transmission oil level

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Jack Up Car Use Your Jack to Raise Your Car

Where is the jack location, jack points and other tips on jacking up a vehicle

2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

2012 Mitsubishi Lancer SE 2.4L 4 Cyl. Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

The engine in your 2008 Mitsubishi Lancer should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick or the transmission fluid check plug is located in your Lancer and how to check the transmission fluid level. Your Lancer will have either a transmission dipstick or a check or fill plug to perform a transmission fluid check. The transmission dipstick will typically be in the engine bay or on top or even the side of your Lancer transmission. The transmission check plug will typically be on the bottom or the side of the transmission and may also be next to the axle. If the transmission fluid level in your Lancer is low, you need to add transmission fluid through the dipstick tube or the check plug hole. When adding transmission fluid to your Lancer, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.

If you are having problems with the transmission in your Lancer, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.

  • Advance Auto coupon for
    20% off entire order: KIOSK20