Rear Windshield Wiper Blade Change: 2009 Pontiac G3 1.6L 4 Cyl.

Pontiac G3 Model Years - 2009, 2010

How to take off the 2009 G3 rear wiper blade and replace it

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2009 Pontiac G3 1.6L 4 Cyl. Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2009 Pontiac G3 1.6L 4 Cyl. Lights Headlight (replace bulb)

Avoid tickets and accidents with both working headlights! New bulbs are much brighter too

2009 Pontiac G3 1.6L 4 Cyl. Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

2009 Pontiac G3 1.6L 4 Cyl. Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to remove the rear wiper blade in your 2009 Pontiac G3. Replace the rear wiper blade on your G3 at least once a year even if you don't use your wiper much - the sun wears out the wiper wiper blade rubber more than using it to wipe water. Another trick to enhance the longevity of your G3's wiper blade is to scrape off the ice and snow from the glass or use the defroster before using your wiper. A layer of ice has sharp edges that can reduce the effectiveness of the micro edge of the rubber wiper blade.

  • Advance Auto coupon for
    20% off entire order: KIOSK20