Check Power Steering Level: 2010 Acura MDX 3.7L V6
Acura MDX Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013
Location of power steering reservoir to determine if fluid is low
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot
Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?
Learn where your spare tire and jack are located before you need it on the side of the road
Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!
- BMW of MKE North helped make these videos
- Feedback
- Download Acura owners manuals
The video above shows you the steps needed to check the power steering fluid level in your 2010 Acura MDX. Checking the power steering fluid level in your MDX is relatively easy and should be done once a month or if you are experienced difficulty turning the wheel or steering your MDX. Your MDX should be parked on a level surface and your 3.7 liter engine should be cold to the touch.
If the power steering fluid level in your MDX is low, fill it up to the maximum line with power steering fluid and check it again in a week to determine if you have a leak. The power steering fluid reservoir will typically have a symbol of a steering wheel on the cap. Likewise, if your MDX has electric power steering, you may see a steering wheel picture with an explanation point next to it on your dashboard to indicate power steering problems.
- Advance Auto coupon for
20% off entire order: KIOSK20
