Blown Fuse Check 2011 Cadillac STS 3.6L V6

Cadillac STS Model Years - 2005, 2006, 2007, 2008, 2009, 2010, 2011

Locate the engine fuse box and remove the cover

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2011 Cadillac STS 3.6L V6 Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2007 Cadillac SRX 4.6L V8 Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2011 Cadillac STS 3.6L V6 Oil Add Oil

Many cars will burn or leak a little bit of oil. Over time, this adds up and you might need to add some - learn how to here!

2011 Cadillac STS 3.6L V6 Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

The video above shows how to check for blown fuses in the engine bay of your 2011 Cadillac STS and where the fuse box diagram is located. If your map light, stereo, turn signals, heated seats, headlights or other electronic components suddenly stop working, chances are you have a fuse that has blown out. Fuses should always be the first thing you check if your STS is experiencing electrical difficulties because they are relatively easy to check and inexpensive to change. The more electronics your STS has, the more fuses it has. Some Cadillacs have multiple fuse boxes in the engine bay, so be sure to find the fuse(s) in question. Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component in question.

If you need to replace a blown fuse in your STS, make sure you replace it with one that has the same amperage as the blown fuse. If checking and replacing the fuse for the component in question doesn't work, we recommend seeking assistance from a trusted professional mechanic. They should be able to figure out if the component needs to be replaced or if there is a short or some other problem with your STS.

  • Advance Auto coupon for
    20% off entire order: KIOSK20