Coolant Flush How-to: 2011 Jeep Liberty Sport 3.7L V6
Jeep Liberty Model Years - 2008, 2009, 2010, 2011, 2012
How to drain coolant and do a radiator flush
Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.
A check engine light can be cleared with a simple fix or it could be a major problem - find out now!
If your car blows hot air when your air conditioner is turned on, try recharging the freon first
On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!
The burnt out tail light: classic reason for a cop to pull you over - change yours now
- Rosen helped make these videos
- Feedback
- Download Jeep owners manuals
Learn how to flush the coolant (antifreeze) in your 2011 Jeep Liberty. Coolant / antifreeze circulates through Liberty radiator and engine to maintain the proper temperature. Coolant / antifreeze also passes through the heater core under your cowl to provide heat to the cabin of your Liberty. In addition to preventing your car from overheating, coolant / antifreeze also helps lubricate the seals in the water pump and hoses. Start your coolant flush by draining the coolant / antifreeze that is in your reservoir, then drain the coolant that is in your radiator by opening the petcock or removing the lower radiator hose. This video shows where the radiator drain plug (petcock) is located on a 2011 Jeep Liberty. Fill up the radiator with distilled water and run the engine. Turn off the engine and drain the water, fill up the radiator with antifreeze until you have a 50/50 coolant / distilled water mixture and burp the system.
Like the oil in your Liberty, coolant gets dirty over time and loses its ability to cool down your 3.7 liter engine. When you flush your coolant, which is antifreeze, on your 2011, you are draining out all of the old dirty coolant and preventing costly radiator and cooling system repair down the road. The video above shows you where the petcock on your radiator is located, how to flush the coolant / antifreeze and how to burp the system to get the air out of your Liberty.
Coolant is toxic and animals are attracted to the sweet taste of coolant (antifreeze). If you spill coolant when you flush your Liberty, be sure to put down cat litter to soak it up to discard it. Flushing the coolant on a regular basis removes gunk and mineral deposits from your engine, while prolonging the life of your heater core, thermostat, hoses and water pump.
- Advance Auto coupon for
20% off entire order: KIOSK20
