Transmission Fluid Level Check 2011 Subaru Forester X 2.5L 4 Cyl.

Subaru Forester Model Years - 2009, 2010, 2011, 2012, 2013

How to check the ATF fluid / Transmission oil level

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2011 Subaru Forester X 2.5L 4 Cyl. Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2011 Subaru Forester X 2.5L 4 Cyl. Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2011 Subaru Forester X 2.5L 4 Cyl. Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

2011 Subaru Forester X 2.5L 4 Cyl. Tires & Wheels Change a Flat Tire

Learn where your spare tire and jack are located before you need it on the side of the road

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

The engine in your 2011 Subaru Forester should be running when you perform a transmission fluid level check, otherwise it will be inaccurate. The video above shows where the transmission fluid dipstick or the transmission fluid check plug is located in your Forester and how to check the transmission fluid level. Your Forester will have either a transmission dipstick or a check or fill plug to perform a transmission fluid check. The transmission dipstick will typically be in the engine bay or on top or even the side of your Forester transmission. The transmission check plug will typically be on the bottom or the side of the transmission and may also be next to the axle. If the transmission fluid level in your Forester is low, you need to add transmission fluid through the dipstick tube or the check plug hole. When adding transmission fluid to your Forester, be sure to add it slowly as it will fill up quickly and is difficult to remove excess fluid if you overfill.

If you are having problems with the transmission in your Forester, such as clunky shifting or hesitation, check the fluid level first - it is amazing how many drivers pay thousands of dollars for transmission work when a half quart of transmission fluid would have fixed the problem.

  • Advance Auto coupon for
    20% off entire order: KIOSK20