Battery Replacement: 2012 Chrysler 200 LX 3.6L V6 FlexFuel

Chrysler 200 Model Years - 2011, 2012, 2013, 2014

Where the battery is located and how to remove the 12V battery terminals

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan Oil Check Oil Level

Cars burn, leak and otherwise dispense of their oil. Check your level frequently and top up when necessary

2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door) Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2013 Chrysler 200 Limited 3.6L V6 FlexFuel Sedan Coolant (Antifreeze) Check Coolant Level

Your coolant should perform well under any condition - just like Aaron Rodgers!

2012 Chrysler 200 LX 2.4L 4 Cyl. Sedan (4 Door) Tires & Wheels Check Tire Pressure

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Where is the battery located in a Chrysler 200?

The video above shows you how to replace the battery in your 2012 Chrysler 200. We recommend changing the battery in Chryslers every 4 years. Although some batteries last much longer, most batteries begin breaking down chemically after four years, so you could experience dimmer headlights and other negative effects before you have a dead battery in your 200 that you need to replace.

The battery location in a Chrysler 200 can typically be found in the engine bay, but may be in the trunk, fender or inside of the vehicle. You may need to remove the air filter housing, a plastic engine cover or parts of the cowl to find the battery in your 200. See exactly where the battery is located in your 2012 Chrysler 200.

Replacing the battery in your 200 involves removing the terminals. When you reconnect the terminals, your radio presets are likely to be cleared out. In some 200s, you may need to re-enter a security code to get your radio to work again. Check for this code in your owners manual - it will usually be either a sticker or small card in the booklet. If you can't find it, call Chrysler and they will give you the code for free. In many Chryslers, the transmission "learns" how you drive over time and makes adjustments, so you may experience altered driving dynamics as your car re-learns your driving style after changing the battery.

  • Advance Auto coupon for
    20% off entire order: KIOSK20