How to Add Oil: 2012 Chrysler 300 Limited 3.6L V6

Chrysler 300 Model Years - 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

How to remove the oil cap, add the correct oil type, check oil capacity, and fix minor oil leaks

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2012 Chrysler 300 Limited 3.6L V6 Windshield Wiper Blade (Front) Replace Wiper Blades

Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year

2012 Chrysler 300 Limited 3.6L V6 Lights Reverse Light (replace bulb)

White light when you back up - yup, they burn out and you can replace them with bright LEDs

2012 Chrysler 300 Limited 3.6L V6 Coolant (Antifreeze) Flush Coolant

Flushing the coolant in your car is not that hard and will extend the life of your engine tremendously - learn how here!

2012 Chrysler 300 Limited 3.6L V6 Air Conditioner Recharge Freon

If your car blows hot air when your air conditioner is turned on, try recharging the freon first

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

See how to add oil to your 2012 Chrysler 300 and where to add oil. This video shows the location of the oil filler cap and how to find the filler cap in a 2012 300. Before adding oil to your 300, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your 300 has a low oil level.

How much oil does my car take? For most Chryslers, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil to get to a point where the car is safe to drive. If you drained all of the oil, check your owners manual for the 2012 Chrysler 300 oil capacity.

Why is my car low on oil? Your car is leaking oil or your car is burning oil. Symptoms of an oil leak include oil leak coming from the 300’s oil drain plug, a leaky oil filter gasket, a leak at the rear main seal, a loose oil fill plug or any other location that causes oil to leak under the car. It is typically okay to drive a car with an oil leak as long as you add fluid regularly and do not let the fluid leak get too low. You can often fix an oil leak yourself for cheap by adding an oil leak stopper directly to the 300 oil fill hole. Otherwise, you need to identify where the oil leak is coming from and fix that part.

If your 2012 Chrysler has a low oil light on, that means you have low oil pressure, which indicates a mechanical problem and you should not drive your car and turn your engine off.

  • Advance Auto coupon for
    20% off entire order: KIOSK20