Coolant Flush How-to: 2012 Jeep Patriot Sport 2.0L 4 Cyl.

Jeep Patriot Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

How to drain coolant and do a radiator flush

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2008 Jeep Patriot Sport 2.4L 4 Cyl. Windshield Wiper Blade (Front) Replace Wiper Blades

Did you know that the sun wears out wiper blades faster than rain? Replace your blades twice a year

2012 Jeep Patriot Sport 2.0L 4 Cyl. Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2012 Jeep Patriot Sport 2.0L 4 Cyl. Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

2012 Jeep Patriot Sport 2.0L 4 Cyl. Windshield Washer Fluid Add Fluid

One of the easiest fluids to top off - learn how to open the hood and where the reservoir is on your car

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Learn how to flush the coolant (antifreeze) in your 2012 Jeep Patriot. Coolant / antifreeze circulates through Patriot radiator and engine to maintain the proper temperature. Coolant / antifreeze also passes through the heater core under your cowl to provide heat to the cabin of your Patriot. In addition to preventing your car from overheating, coolant / antifreeze also helps lubricate the seals in the water pump and hoses. Start your coolant flush by draining the coolant / antifreeze that is in your reservoir, then drain the coolant that is in your radiator by opening the petcock or removing the lower radiator hose. This video shows where the radiator drain plug (petcock) is located on a 2012 Jeep Patriot. Fill up the radiator with distilled water and run the engine. Turn off the engine and drain the water, fill up the radiator with antifreeze until you have a 50/50 coolant / distilled water mixture and burp the system.

Like the oil in your Patriot, coolant gets dirty over time and loses its ability to cool down your 2.0 liter engine. When you flush your coolant, which is antifreeze, on your 2012, you are draining out all of the old dirty coolant and preventing costly radiator and cooling system repair down the road. The video above shows you where the petcock on your radiator is located, how to flush the coolant / antifreeze and how to burp the system to get the air out of your Patriot.

Coolant is toxic and animals are attracted to the sweet taste of coolant (antifreeze). If you spill coolant when you flush your Patriot, be sure to put down cat litter to soak it up to discard it. Flushing the coolant on a regular basis removes gunk and mineral deposits from your engine, while prolonging the life of your heater core, thermostat, hoses and water pump.

  • Advance Auto coupon for
    20% off entire order: KIOSK20