Battery Replacement: 2012 Jeep Wrangler Unlimited Sport 3.6L V6

Jeep Wrangler Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

Where the battery is located and how to remove the 12V battery terminals

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2014 Jeep Wrangler Sport 3.6L V6 Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2014 Jeep Wrangler Sport 3.6L V6 Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2014 Jeep Wrangler Sport 3.6L V6 Lights Daytime Running Light (replace bulb)

DRLs are on more than your headlights. They burn out faster and should be replaced regularly

2014 Jeep Wrangler Sport 3.6L V6 Brake Fluid Add Fluid

If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Where is the battery located in a Jeep Wrangler?

The video above shows you how to replace the battery in your 2012 Jeep Wrangler. We recommend changing the battery in Jeeps every 4 years. Although some batteries last much longer, most batteries begin breaking down chemically after four years, so you could experience dimmer headlights and other negative effects before you have a dead battery in your Wrangler that you need to replace.

The battery location in a Jeep Wrangler can typically be found in the engine bay, but may be in the trunk, fender or inside of the vehicle. You may need to remove the air filter housing, a plastic engine cover or parts of the cowl to find the battery in your Wrangler. See exactly where the battery is located in your 2012 Jeep Wrangler.

Replacing the battery in your Wrangler involves removing the terminals. When you reconnect the terminals, your radio presets are likely to be cleared out. In some Wranglers, you may need to re-enter a security code to get your radio to work again. Check for this code in your owners manual - it will usually be either a sticker or small card in the booklet. If you can't find it, call Jeep and they will give you the code for free. In many Jeeps, the transmission "learns" how you drive over time and makes adjustments, so you may experience altered driving dynamics as your car re-learns your driving style after changing the battery.

  • Advance Auto coupon for
    20% off entire order: KIOSK20