Tire Pressure for 2013 Dodge Charger SE 3.6L V6 FlexFuel

Dodge Charger Model Years - 2011, 2012, 2013, 2014

Correct tire pressure for your Charger? Hint: it's not the tire pressure on your tires

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Dodge Charger SE 3.6L V6 FlexFuel Fuse (Interior) Check

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

2013 Dodge Charger SE 3.6L V6 FlexFuel Lights Center Brake Light (replace bulb)

Don't be the guy with your third brake light burnt out

2013 Dodge Charger SE 3.6L V6 FlexFuel Coolant (Antifreeze) Fix Leaks

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

2013 Dodge Charger SE 3.6L V6 FlexFuel Coolant (Antifreeze) Add Coolant

Low coolant levels is all to common - top yours up today

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Did you know that the most important thing you can do to care for your tires and improve your fuel economy is to maintain the proper air pressure? Checking the tire pressure in your 2013 Dodge Charger is relatively easy and important to do on a regular basis. Open the driver side door on your Charger and look for a sticker that indicates what the tire pressure should be. Don't use the maximum pressure indicated on the sidewall of your tires. It is best to check the tire pressure on your Charger in the morning before the car has been used or when you have driven it for less than a mile. When you drive your Charger, the air inside your tires warms up and expands, so to get an accurate reading, check the tire pressure when the car has not been driven recently.

Many vehicles are equipped with a TPMS sensor in each wheel to detect the tire pressure of each tire. TPMS means tire pressure monitoring system. If your 2013 Dodge Charger has a tire pressure light that illuminates in the dashboard when you start your vehicle, it has TPMS sensors. The TPMS light should illuminate briefly when you start your car, but then turn off afterwards. If your tire pressure light keeps coming on or the tire pressure light is blinking or flashing, then you likely have low tire pressure in your tires. For most vehicles, inflate the tires to the proper pressure and drive your vehicle a few miles and the tire pressure light will reset and turn off. TPMS sensors have batteries in them and they are mounted inside of the tire. Eventually that battery will die and the tire pressure sensor will need to be replaced in order to get the Dodge Charger tire pressure light off.

Underinflated tires decrease the gas mileage of your Charger, wear out faster and make the vehicle harder to steer, whereas overinflated tires blow out more easily, wear out faster and can cause unsafe handling dynamics. For these reasons and more – keeping your tires properly inflated on a regular basis is easy and important.

  • Advance Auto coupon for
    20% off entire order: KIOSK20