How To Open Hood: 2013 Scion FR-S 2.0L 4 Cyl.

Scion FR-S Model Years - 2013, 2014, 2015, 2016

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Scion FR-S 2.0L 4 Cyl. Air Filter (Engine) Replace

Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?

2013 Scion FR-S 2.0L 4 Cyl. Fuse (Interior) Check

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

2013 Scion FR-S 2.0L 4 Cyl. Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2013 Scion FR-S 2.0L 4 Cyl. Lights Headlight (replace bulb)

Avoid tickets and accidents with both working headlights! New bulbs are much brighter too

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2013 Scion FR-S. Popping the hood, or bonnet, on your FR-S is a two step process, you need to release the hood latch inside your FR-S and then you need to release the safety latch under your hood in the front of your FR-S. The video above shows you the location of both hood latches.

Sometimes, the hood on Scions gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your FR-S, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your FR-S with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older FR-Ss, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2013 Scion FR-S is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20