Battery Replacement: 2013 Subaru BRZ Limited 2.0L 4 Cyl.

Subaru BRZ Model Years - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Where the battery is located and how to remove the 12V battery terminals

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2013 Subaru BRZ Limited 2.0L 4 Cyl. Lights Fog Light (replace bulb)

Don't be caught in the fog with burnt out fog light bulbs

2013 Subaru BRZ Limited 2.0L 4 Cyl. Lights Highbeam (replace bulb)

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

2013 Subaru BRZ Limited 2.0L 4 Cyl. Lights Turn Signal - Rear (replace bulb)

Don't send mixed signals - if your turn signal doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2013 Subaru BRZ Limited 2.0L 4 Cyl. Fuse (Interior) Replace

Got a short fuse? Don't blow a fuse, change it!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

Where is the battery located in a Subaru BRZ?

The video above shows you how to replace the battery in your 2013 Subaru BRZ. We recommend changing the battery in Subarus every 4 years. Although some batteries last much longer, most batteries begin breaking down chemically after four years, so you could experience dimmer headlights and other negative effects before you have a dead battery in your BRZ that you need to replace.

The battery location in a Subaru BRZ can typically be found in the engine bay, but may be in the trunk, fender or inside of the vehicle. You may need to remove the air filter housing, a plastic engine cover or parts of the cowl to find the battery in your BRZ. See exactly where the battery is located in your 2013 Subaru BRZ.

Replacing the battery in your BRZ involves removing the terminals. When you reconnect the terminals, your radio presets are likely to be cleared out. In some BRZs, you may need to re-enter a security code to get your radio to work again. Check for this code in your owners manual - it will usually be either a sticker or small card in the booklet. If you can't find it, call Subaru and they will give you the code for free. In many Subarus, the transmission "learns" how you drive over time and makes adjustments, so you may experience altered driving dynamics as your car re-learns your driving style after changing the battery.

  • Advance Auto coupon for
    20% off entire order: KIOSK20