How to Add Oil: 2014 Jeep Wrangler Sport 3.6L V6

Jeep Wrangler Model Years - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

How to remove the oil cap, add the correct oil type, check oil capacity, and fix minor oil leaks

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2014 Jeep Wrangler Sport 3.6L V6 Transmission Fluid Fix Leaks

Transmissions that leak fluid usually have never been flushed and the seal is finally leaking. The right stop leak product can cure a lot

2014 Jeep Wrangler Sport 3.6L V6 Battery Jumpstart

Learning how to jump your car before you need to is an excellent idea

2014 Jeep Wrangler Sport 3.6L V6 Brake Fluid Add Fluid

If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

2014 Jeep Wrangler Sport 3.6L V6 Lights Fog Light (replace bulb)

Don't be caught in the fog with burnt out fog light bulbs

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

See how to add oil to your 2014 Jeep Wrangler and where to add oil. This video shows the location of the oil filler cap and how to find the filler cap in a 2014 Wrangler. Before adding oil to your Wrangler, make sure that your engine was cold and that your car was parked on a level surface when you checked the oil level otherwise you won't be able to tell if your Wrangler has a low oil level.

How much oil does my car take? For most Jeeps, if your oil level is at the minimum mark on your dipstick, you should add about a quart of oil to get to a point where the car is safe to drive. If you drained all of the oil, check your owners manual for the 2014 Jeep Wrangler oil capacity.

Why is my car low on oil? Your car is leaking oil or your car is burning oil. Symptoms of an oil leak include oil leak coming from the Wrangler’s oil drain plug, a leaky oil filter gasket, a leak at the rear main seal, a loose oil fill plug or any other location that causes oil to leak under the car. It is typically okay to drive a car with an oil leak as long as you add fluid regularly and do not let the fluid leak get too low. You can often fix an oil leak yourself for cheap by adding an oil leak stopper directly to the Wrangler oil fill hole. Otherwise, you need to identify where the oil leak is coming from and fix that part.

If your 2014 Jeep has a low oil light on, that means you have low oil pressure, which indicates a mechanical problem and you should not drive your car and turn your engine off.

  • Advance Auto coupon for
    20% off entire order: KIOSK20