How to Add Refrigerant to a 2015 Mitsubishi Mirage ES 1.2L 3 Cyl.

Mitsubishi Mirage Model Years - 2014, 2015, 2016, 2017, 2018, 2019, 2020

Where the low pressure A/C port is on 2015 Mirage and how to add add freon

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2015 Mitsubishi Mirage ES 1.2L 3 Cyl. Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2015 Mitsubishi Mirage ES 1.2L 3 Cyl. Air Filter (Engine) Replace

Replacing a dirty air filter can improve gas mileage by up to 4%. Isn't efficiency great?

2015 Mitsubishi Mirage ES 1.2L 3 Cyl. Lights Turn Signal - Front (replace bulb)

If your blinker doesn't blink, or blinks rapidly, you likely have a burnt out bulb

2015 Mitsubishi Mirage ES 1.2L 3 Cyl. Check Engine Light Diagnose

A check engine light can be cleared with a simple fix or it could be a major problem - find out now!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

When the air conditioner in your 2015 Mitsubishi Mirage starts blowing hot air, you likely have a freon leak. Recharging the freon in your AC system is an inexpensive and easy first step to restoring the cooling capacity of your A/C system. Most refrigerants include a leak sealer that will seal small leaks in addition to filling the R134a freon. The A/C system in your Mirage consists of a compressor that is belt-driven, an evaporator and freon. If there is a problem with your compressor or evaporator, adding freon will not restore cooling.

How do you recharge AC in a 2015 Mitsubishi Mirage? The low side AC port location is the first thing to find when you are looking for how to put freon in a car. Once you find the 2015 Mirage AC low pressure port cap, hook up the can of refrigerant to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs. Typically the AC recharge kit you buy will have enough capacity to add enough freon to get the AC in your Mirage to blow cold air.

What type of refrigerant does a 2015 Mitsubishi Mirage use? Air conditioning systems can vary so it is critical that you check the sticker in the engine bay to determine your Mirage refrigerant type. There is an AC sticker in the engine bay of your 2015 Mirage that indicates if it requires R134a refrigerant or the newer R1234YF type to do a recharge. You cannot add R1234YF refrigerant to a R134a system nor can you add R134a refrigerant to a R1234YF system. R134a and R1234YF have different low pressure port types, so you should never use a recharge adapter to add the wrong type of refrigerant. Recharging your Mirage with the wrong type of freon can make the AC recharge cost much higher!

  • Advance Auto coupon for
    20% off entire order: KIOSK20