How To Open Hood: 2016 Jeep Renegade Limited 2.4L 4 Cyl.

Jeep Renegade Model Years - 2015, 2016, 2017, 2018, 2019

Open the Hood - Locate hood latches and open the hood

Author

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

2016 Jeep Renegade Limited 2.4L 4 Cyl. Lights Center Brake Light (replace bulb)

Don't be the guy with your third brake light burnt out

2016 Jeep Renegade Limited 2.4L 4 Cyl. Oil Change Oil and Oil Filter

Sure you can take it in for a $19 lube, but are you OK with a stripped oil pan and cheap parts in return?

2016 Jeep Renegade Limited 2.4L 4 Cyl. Air Filter (Cabin) Replace

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

2014 Fiat 500L 1.4L 4 Cyl. Turbo Transmission Fluid Add Fluid

If your transmission is running low on fluid, be sure to add some - find out how to do this here!

Share on   Share on Twitter   Share on Facebook
Parts & Tools
We may earn a commission from qualifying purchases as an Amazon Associate
Video Description

This video shows you how to open the hood in your 2016 Jeep Renegade. Popping the hood, or bonnet, on your Renegade is a two step process, you need to release the hood latch inside your Renegade and then you need to release the safety latch under your hood in the front of your Renegade. The video above shows you the location of both hood latches.

Sometimes, the hood on Jeeps gets stuck and won't pop up after the interior latch is released. If you need to open the hood with a stuck latch on your Renegade, simply pull up on the hood and it should pop up for you to release the second latch. Another option is to pull the interior hood release, then bang on the hood to see if that pops it open.

If your hood still won't open, you may have a broken hood release cable. Opening the hood on your Renegade with a broken cable requires you to use a coat hanger to reach through the grille and release the latch on the bottom of the hood latch. Sometimes, especially on older Renegades, you may have difficulty getting your hood to latch when you close it. In this case, the interior release lever on your 2016 Jeep Renegade is probably stuck in the “open” position – push the release lever back and forth several times and then try to close your hood.

  • Advance Auto coupon for
    20% off entire order: KIOSK20